Table of Contents
Advertisement
7. Press Set.
Set
The MultiPASS C70 feeds the cleaning sheet into the MultiPASS C70
and cleans the rollers.
Printing on Fabric Sheet FS-101
Fabric Sheet FS-101 for Canon printers come with a booklet that
describes special handling procedures. Be sure to look through this
booklet for special information regarding the fabric sheet.
n
Do not use the fixing agent that is supplied with the Fabric Sheet FS-
101. This agent is not needed when printing with the MultiPASS C70.
Do not touch newly printed fabric sheets until the ink has dried
completely. This takes about an hour.
Follow this procedure to load and print on Fabric Sheets FS-101:
1. Make sure the paper thickness lever is set to the right (
c
To avoid paper jams, smearing, and other problems, never open the
printer cover to set the paper thickness lever while the MultiPASS
C70 is printing.
5-24
Paper Handling
For details, refer to Setting the Paper Thickness Lever on page 5-10.
C
I n
B
a
r t
k
C
r i
B
d
l -
g
l a
2
e
M
c
1
a
k
J
d
a
e
p
a
i n
n
e
).
Chapter 5
Advertisement
Table of Contents
