Table of Contents
Advertisement
n
The ink in the BJ cartridges is difficult to clean up if spilled. To avoid
spilling ink, always be sure to follow these precautions when handling
the BJ cartridges:
Do not attempt to disassemble or refill the BJ cartridge or a BJ tank.
Do not shake or drop the BJ cartridge, or tip the print head
downwards.
Keep BJ cartridges out of children's reach.
c
Hold the BJ cartridge by its sides only. Do not touch the print head,
the sharp edges around the print head, the silver plate on the bottom
of the BJ cartridge, or the silver metal or circuit area on its side.
PRINT HEAD
DO NOT TOUCH
Make sure the cartridge holder is in its home position (on the right
side of the unit) when you are not using the MultiPASS C70. If it is
not in its home position, press the C button (inside the unit). Leaving
it out of its home position will dry out the print head on the BJ
cartridge.
Clean the print head when print quality is no longer satisfactory.
Refer to Testing and Cleaning the BJ Cartridge Print Head (1 p. 12-15).
If the print quality does not improve after five consecutive
cleanings, replace the BJ tank or BJ cartridge.
Do not use a BC-21e Colour BJ cartridge with either of its BJ tanks
missing. Doing so can cause the ink to clog.
Do not remove the BJ tanks from the BC-21e Colour BJ cartridge
unnecessarily, or the ink in them may clog.
2-30
Setting Up Your MultiPASS C70
HOLD HERE
Chapter 2
Advertisement
Table of Contents
