Table of Contents
Advertisement
Network Switch System Operation
The procedure for using the network switch system is almost the same
as when using the MultiPASS C70 over a normal telephone line. When
you receive calls, however, the unit will respond slightly differently as
described below.
When you hear the telephone call ring pattern:
Pick up the handset and talk normally. If you hear a slow beep, it means
the call is from a fax machine trying to send a document. Press the
Start/Scan button to receive the document. If you do not pick up the
handset, the unit continues to ring until the other party hangs up. If an
answering machine is connected, it takes over the call.
When you hear the fax call ring pattern:
After the unit rings, it receives the document automatically.
If you want to receive a document without ring:
Make sure that the INCOMING RING setting is set to OFF.
(1 pp. 14-11, 14-12)
8-24
Receiving Faxes
Chapter 8
Advertisement
Table of Contents
