Table of Contents
Advertisement
MultiPASS C70 Guidelines
Follow these guidelines to avoid damage to your MultiPASS C70 and
harm to you or others:
Place the MultiPASS C70 on a stable surface. Do not use an angled
stand. Avoid setting the unit in direct sunlight.
Do not install the MultiPASS C70 near devices that contain magnets
or generate magnetic fields, such as speakers.
Do not subject the MultiPASS C70 to strong physical shock or
vibration.
Make sure the area where you use the unit is free from dust.
Keep the MultiPASS C70 clean. Dust accumulation can prevent the
unit from operating properly.
To ensure proper electrical contact, make sure the unit is firmly
plugged in.
Never pull on the cord to unplug the MultiPASS C70. Pull on the
plug itself.
Do not overload the electrical outlet where the MultiPASS C70 is
plugged in.
For your safety, unplug the MultiPASS C70 during electrical storms.
To avoid damage to the unit from overheating, do not block the
exhaust vent. Install the unit approximately 10 cm away from walls
and other equipment.
12-2
Maintenance
Chapter 12
Advertisement
Table of Contents
