Table of Contents
Advertisement
Storing a BJ Cartridge in its Container
Once a BJ cartridge is unwrapped, its print head must be kept from
drying out, or it can clog and fail to work properly. A BJ cartridge
installed in the MultiPASS C70 is protected from drying out by
automatically moving to the home position on the right side of the unit
and capping itself.
If you remove a partially used BJ cartridge from the MultiPASS C70,
store it in the SB-21 BJ cartridge container provided with your unit.
c
Hold the BJ cartridge by its sides only. Do not touch the print head,
the sharp edges around the print head, the silver plate on the bottom
of the BJ cartridge, or the silver metal or circuit area on its side.
PRINT HEAD
DO NOT TOUCH
1. Press on the release tab and open the cover.
Chapter 2
HOLD HERE
Setting Up Your MultiPASS C70
2-37
Advertisement
Table of Contents
