Table of Contents
Advertisement
Make sure the total amperage used by all devices plugged into the
wall outlet does not exceed the ampere rating of the outlet's circuit
breaker.
Do not allow anything to rest on the power cord, and do not locate
the unit where the cord will be walked on. Make sure the cord is not
knotted or kinked.
If you use an extension cord with the MultiPASS C70, make sure
that the total of the ampere ratings on the products plugged into the
extension cord does not exceed the extension cord ampere rating.
Also make sure that the total ampere rating of all products plugged
into the wall outlet does not exceed the current amperage of the
circuit breaker.
Do not push objects of any kind into the slots or openings on the
cabinet as they may touch dangerous voltage points or short out
parts. This could result in fire or electric shock.
Do not allow small objects (such as pins, paper clips, or staples) to
fall into the MultiPASS C70. If something does fall into it, unplug the
unit immediately and contact your local authorised Canon dealer or
the Canon help line.
To avoid spillage in or around the unit, do not eat or drink near the
unit. If you spill liquid or if any substance falls into the unit,
immediately unplug the unit and contact your local authorised
Canon dealer or the Canon help line.
Always unplug the MultiPASS C70 before moving or cleaning it.
Whenever you unplug the MultiPASS C70, wait at least five seconds
before you plug it in again.
During electrical storms, disconnect the power cord from the power
outlet. (Please note that any documents stored in the unit's memory
will be deleted when you unplug the unit.)
1-19
Chapter 1
Introducing the MultiPASS C70
Advertisement
Table of Contents
