Table of Contents
Advertisement
2. With the cloth side out (towards you) and the open end up (away
from the multi-purpose tray), insert one sheet into the multi-
purpose tray until it stops, so that the right edge of the sheet is
aligned with the right side of the multi-purpose tray. Then slide the
paper guide snugly against the left edge of the sheet.
3. Your MultiPASS C70 is now ready to print. Set your PC to print on
the fabric sheet.
4. When the fabric sheet is printed, let it dry for about one hour to
allow the ink to dry completely.
5. When dry, peel the film backing from the printed fabric sheet.
6. Wash the printed fabric sheet for about three minutes under
lukewarm running water to remove extra ink.
7. Hang the fabric sheet up to dry it again.
8. Iron the dried fabric sheet with a clothes iron.
n
See the booklet that comes with the Fabric Sheet FS-101 for details on
drying and washing.
Chapter 5
OPEN END AT THE TOP
5-25
Paper Handling
Advertisement
Table of Contents
