Table of Contents
Advertisement
Summary of Lists and Reports
Shown below are the lists and reports that can be printed from your
MultiPASS C70. Most of the lists and reports can be found in this
section. However, you may also need to refer to other chapters for
details on some of them.
Activity Report (2 p. 11-5)
This report prints a list of the previous 20 transactions on your unit.
Transmission (TX) Reports
Error TX Report (2 p. 11-6)
This report prints every time an error occurs during sending.
TX Report (2 p. 11-6)
This report can be printed every time a document is sent.
TX Report With First Page (2 p. 11-7)
This report can be printed as a reminder of the contents of a black &
white document sent using memory sending. (The TX Report cannot
be printed with a colour document.)
Reception (RX) Reports
Error RX Report (2 p. 11-9)
This report prints every time an error occurs during fax reception.
RX Report (2 p. 11-9)
This report can be printed every time a fax is received.
Multi TX/RX Report (2 p. 11-8)
This report prints if the transmission was a sequential broadcast.
Memory List/Report
Doc. Memory List (2 p. 7-28)
This list prints details of all documents currently stored in memory.
Memory Clear Report (2 pp. 11-10, 13-36)
This report prints when power is restored after a power cut. It
shows a list of the transactions deleted from memory.
11-2
Reports and Lists
Chapter 11
Advertisement
Table of Contents
