Canon MultiPASS C70 User Manual page 59

Canon user's guide multipass c70

Hide thumbs Also See for MultiPASS C70:

Table of Contents

Connect the power cord as follows:

1. Plug the supplied power cord into the power cord connector on the

back of the MultiPASS C70.

2. Plug the other end of the power cord into a properly grounded AC

outlet (three-pronged outlet).

The MultiPASS C70 has no power switch, so its power is on as long as it

is plugged in. Once connected, though, the unit still needs to warm up

before you can use it.

While the MultiPASS C70 is warming up, the Alarm light blinks

and the following message appears in the LCD display:

When the time and receive mode appear, the MultiPASS C70 is

in standby mode and ready for use.

Setting Up Your MultiPASS C70