Table of Contents
Advertisement
Printing on Banner Paper
Banner paper is a continuous sheet of paper with perforations at equal
distances along its length, where it can be cut to the length required. For
best results, use Canon's Banner Paper.
To set up a print job on banner paper, you must decide on the number
of sheets you need. You can print banners from two to six sheets in
length.
n
Always leave an extra sheet at the end of the banner—just in case the
type runs over.
The shaded portions of the illustration below show the maximum
recommended printing area of banner paper.
3.4 mm
3.4 mm
12.7 mm
n
Printing on banner paper requires quite a bit of ink. If you think your
BJ cartridge may run out of ink, use a new BJ cartridge.
For best print results on banner paper, use light design patterns.
To prevent ink from running over the edges of the sheet, print within
the margins shown in the illustration above.
5-26
Paper Handling
APPROX. 1800 mm (6 SHEETS MAX.)
2 SHEETS MIN.
297 mm
210 mm
40 mm
Chapter 5
Advertisement
Table of Contents
