Table of Contents
Advertisement
Transmission (TX) Reports
For details on enabling or disabling printing of the transmission report,
refer to the TX REPORT setting in the REPORT SETTINGS menu.
(1 pp. 14-7, 14-8)
Error TX Report
The MultiPASS C70 is set to print a report if an error occurs during sending.
This is the default setting for the TX REPORT setting. (1 TX REPORT,
pp. 14-7, 14-8)
27/12 2000 14:59 FAX 123 4567
TX Report
You can change the TX REPORT setting to print a transmission (TX)
report for every document you send. (1 TX REPORT, pp. 14-7, 14-8)
27/12 2000 14:59 FAX 123 4567
* For colour transmissions, the message ":COLOR TX" is printed next to the
TX/RX NO.
11-6
Reports and Lists
CANON
*******************************
ERROR TX REPORT
***
*******************************
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
CONNECTION TEL
CONNECTION ID
ST. TIME
USAGE T
PGS. SENT
RESULT
CANON
***********************
TX REPORT
***
***********************
TRANSMISSION OK
TX/RX NO
CONNECTION TEL
CONNECTION ID
ST. TIME
USAGE T
PGS. SENT
RESULT
***
0003*
1 432 2060
Canon OPTICS
27/12 14:59
00'00
0
NG
#018
BUSY/NO SIGNAL
***
0003*
1 432 2060
Canon OPTICS
27/12 14:59
00'18
1
OK
001
001
Chapter 11
Advertisement
Table of Contents
