Table of Contents
Advertisement
Network FAX/TEL Switching (New Zealand Only)
In New Zealand, Telecom N.Z. offers the FaxAbility capability. This
service allows you to assign two numbers to your line: one for fax and
one for telephone. When the fax number is called, the network sends a
specific ring tone which your unit recognises and automatically handles
as a fax call. If the telephone number is called, a different ring tone is
sent out from the network so that the call is handled as a voice call. This
means that there is no switching delay at the caller's end.
n
You can also set the MultiPASS C70 for network FAX/TEL switching
from the MultiPASS Desktop Manager. (1 MultiPASS Suite Software
User's Guide)
Setting the MultiPASS C70 for Network Switch
Follow the procedure below to set the receive mode to NET SWITCH.
1. Press Function.
Function
2. Press Data Registration.
01
Data Registration
3. Press Set.
Set
4. Use d or u to select RX SETTINGS.
08
02
8-22
Receiving Faxes
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
Chapter 8
Advertisement
Table of Contents
