Table of Contents
Advertisement
Maintenance
The most important thing you can do to extend the life of your
MultiPASS C70 and to ensure optimum print quality is to take care of
the BJ cartridges.
c
Spilled ink can stain any surface. Open BJ cartridges and BJ tanks
carefully, and follow the guidelines here to protect against spilled ink.
If you are using both the BC-21e Colour and BX-20 Black BJ
cartridges, be sure to store the unused BJ cartridge in the SB-21 BJ
cartridge container provided with your MultiPASS C70. You may
have to purchase additional BJ cartridge containers to store optional
BJ cartridges.*
Keep BJ cartridges and BJ tanks in their sealed containers until you
are ready to use them.
Do not remove the BJ tanks from the BC-21e Colour BJ cartridge
unnecessarily. This may cause the ink to clog.
Make sure both BJ tanks are installed in the BC-21e Colour BJ
cartridge. Attempting to use the BC-21e Colour BJ cartridge with
only one BJ tank installed may cause the ink to clog.
If spilled, the ink is difficult to remove. Therefore, keep the BJ
cartridge and BJ tanks out of the reach of children.
Do not touch the print head area on the BJ cartridge. Ink may leak
out and cause stains.
c
Hold the BJ cartridge by its sides only. Do not touch the print head,
the sharp edges around the print head, the silver plate on the bottom
of the BJ cartridge, or the silver metal or circuit area on its side.
PRINT HEAD
DO NOT TOUCH
* The BJ cartridges included with your MultiPASS C70 may vary depending on
the country of purchase.
12-14
Maintenance
HOLD HERE
Chapter 12
Advertisement
Table of Contents
