Setting The Paper Thickness Lever - Canon MultiPASS C70 User Manual

Setting the Paper Thickness Lever

Before loading paper or other print media in the multi-purpose tray, set
the paper thickness lever. The paper thickness lever adjusts the gap
between the print head and the print paper to suit the paper's thickness.
Set to the left ( p ) for paper and most other print media.
Set to the right (
n
If the paper thickness lever is not set correctly before printing,
smudging and poor print quality may result.
c
To avoid paper jams, smearing, and other problems, never open the
printer cover to set the paper thickness lever while the MultiPASS
C70 is printing.
Set the paper thickness lever as follows:
1. Open the printer cover by grasping the document guides and
DOCUMENT GUIDE
5-10
Paper Handling
e
lifting.
If the printer cover does not open easily, slide the document
guides outwards and then open the printer cover.
) for envelopes and Canon Fabric Sheet FS-101.
DOCUMENT GUIDE
Chapter 5