Setting the Telephone Line Type
Before using your MultiPASS C70 to make calls or send documents, you
need to make sure the telephone line type setting of your unit matches
the telephone line you have. If you are unsure of the type of telephone
line you have, check with your local telephone company.
Your MultiPASS is factory-set to TOUCH TONE. If you need to change
this setting, follow the procedure below:
1. Press Function.
Function
2. Press Data Registration.
01
Data Registration
3. Press Set.
Set
4. Press Set again.
Set
5. Use d or u to select TEL LINE TYPE.
08
02
6. Press Set.
Set
Chapter 3
DATA REGSTRATION
USER SETTINGS
DATE & TIME
TEL LINE TYPE
The current line type setting is displayed.
Ex:
TOUCH TONE
Registering Information in the MultiPASS C70
3-19