Table of Contents
Advertisement
AUTOMATIC TRANSMISSION REPORT
Automatic printing of the transmission report is controlled by the configuration parameter settings, as
described in the section: "CONFIGURATION PARAMETERS", heading: "Programming chart and
description of the sub-menu: various settings".
For convenience, the options which can be selected in the configuration parameters are summarised
below:
TX REPORT: OFF:
TX REPORT: ALWAYS: Always print automatic transmission report.
FAILED TX REPORT:
The last two options enable printing (if applicable) after each transmission (normal, polling or delayed).
Example:
TRANSMISSION REPORT:
REPORT ITEMS
Att. n.
Type
Number called
Destination I.D:
Date and time
Duration
Pages
Result
Similar reports are also printed for Polling and Delayed transmission.
IF...
•
a problem occurs during printing of a transmission report, (e.g. the paper or ink runs out, the
cover is opened, etc.), the machine will print transmission information in the journal.
120
Do not print automatic transmission report.
Only print automatic transmission report in case of failed transmission.
DESCRIPTION
4 digits; operation program Nr.
operation type (TX, RX etc.)
destination fax number
destination number and name
operation date and time
operation duration
Nr. of pages in document
operation outcome
EXAMPLE
0445
TX
534417
Smith
33 125 543182 MKTG FAX
14/06/94
12:08
00:15
03
TX OK
REPORTS
Advertisement
Table of Contents
