Connection And Initial Set-Up - Olivetti OFX 1200 Instruction Manual

CONNECTION AND INITIAL SET-UP

This chapter describes the preliminary operations to be carried out before the machine can be used. These
operations comprise connection to the telephone line, connection to the power supply, turning on the fax,
loading paper into the sheet feeder, installation of the printer cartridge and setting up of the extendible exit
support for transmitted documents.
Correct positioning
•
Place the machine on a stable, flat surface near an existing telephone socket where possible to avoid
having to install another one.
•
Allow sufficient space for the circulation of air and the correct installation of the document exit support to
avoid unnecessary paper accumulation.
•
Do not expose the machine to direct sunlight/excessive heat sources or install it in places subject to
excessive humidity/dust or in the vicinity of radio/television appliances.
WARNING:
•
The fax machine is not equipped with an ON/OFF switch. The power socket must be easily accessible
and near the machine.
•
Only use mains outlets with an earth connection.
For further information and technical characteristics, consult the final section SIGNALS, ERROR
MESSAGES AND TECHNICAL SPECIFICATIONS.
IMPORTANT:
The manufacturer declines all responsibility for improper use, incorrect installation, connection to
unauthorised appliances or tampering by unauthorised personnel.
CONNECTION AND INITIAL SET-UP
11