Table of Contents
Advertisement
•
you want to interrupt transmission at any point:
1) Press STOP. The display will alternate between the
operating mode message and the message prompting you
to press STOP to remove the document (REMOVE
DOCUMENT, PRESS STOP).
2) Press STOP again. The document will be ejected and the
display will alternate between the operating mode message
and the message indicating that transmission has been
interrupted. If the document to be removed comprises
more than one sheet, manually remove all the sheets
above the one that is already inserted in the ADF, then
press STOP to expel also the first sheet.
3) Press STOP again to return to the original machine
operating mode.
4.
Press FUNCTION until you have selected the "Print Out Report"
menu in order to print out the transmission report.
5.
Press START.
The display shows the first parameter.
6.
Press START.
The transmission report is now printed. On completion of printing
the display returns to the original machine operating mode.
IF...
•
you require a transmission report printout every time you
transmit a document, refer to the section CONFIGURATION
PARAMETERS in Programming chart and description of the
sub-menu: Various settings.
RECEIVING A FAX IN AUTOMATIC MODE
This type of reception is preferable when your fax and telephone use two different telephone lines.
With automatic mode reception the fax will receive documents automatically without supervision. The fax
machine is already preset for automatic mode reception, although you can select alternative reception
modes by setting up the fax machine as explained in the section: RECEPTION.
The following chart explains the automatic reception procedure.
v
The display shows the initial operating mode, i.e. automatic reception
mode.
BASIC FUNCTIONS
PRINT OUT REPORT
FUNC/START/STOP
PRINT: TX REPORT
START/STOP/ß/à
PRINTING
STOP
AUTOMATIC RX
21-02-95
12:25
29
Advertisement
Table of Contents
