Programming Chart And Description Of The Sub-Menu: Tel. Line Set-Up - Olivetti OFX 1200 Instruction Manual

PROGRAMMING CHART AND DESCRIPTION OF THE SUB-MENU: TEL. LINE SET-
UP
EXT. LINE: PREFIX
TYPE PREFIX:
(0-9):
RING COUNT: 01
FAX/TEL TIMER:15
SILENCE LAPSE: 4
START: Confirms selection of the sub-menu TEL. LINE SET-UP and moves down to the associated
parameters. Confirms a parameter and the relative value and moves on to the next parameter.
< / > :
To select the value of a parameter by scrolling forward and backward through the values available.
Alternatively used to position the cursor on the characters that make up the value of a particular
parameter; in this latter case, once the position is reached you will be prompted to enter the
required value.
STOP: Interrupts the programming procedure and returns to the original operating mode display.
INSTALLATION PARAMETERS
TEL. LINE SET-UP
PRIV. LINE (PBX)
PBX DIAL: PULSE
EXT. LINE: EARTH
ò
0
PSTN DIAL: PULSE
REMOTE START: ON
ò
TYPE CODE
CODE (0/9, * )
RING COUNT: 02
FAX/TEL TIMER:20
SILENCE LAPSE: 6
ò
PUBL. LINE (PSTN)
ò
PBX DIAL: TONE
ò
EXT. LINE: FLASH
ò
PSTN DIAL: TONE
ò
REMOTE START: OFF
**
ò
RING COUNT: 04
ò
FAX/TEL TIMER:30
ò
SILENCE LAPSE: 8
RING COUNT: 08
FAX/TEL TIMER:40
SILENCE LAPSE: 10
45