Autoredial - Olivetti OFX 1200 Instruction Manual

IF...
•
after having programmed the delayed transmission the paper
or ink runs out so that there is a document, or part of a
document, stored in the memory, it will be impossible to start
delayed transmission until normal conditions are restored.
•
the transmission report function is selected (see section:
REPORTS), the machine will print out a report after displaying
the relative message.
•
you want to interrupt transmission at any point:
1) Press STOP. The display alternately indicates the machine
operation mode message and a message prompting you to
STOP
press
DOCUMENT, PRESS STOP).
2) Press STOP again. The document will be ejected and the
display will alternate between the machine operation mode
message and a message indicating that the transmission
has been interrupted. If the document to be removed
comprises more than one sheet, manually remove all the
sheets above the one in the ADF and then press STOP to
also eject the first sheet.
3) Press STOP again to return to the original operation mode.

AUTOREDIAL

Autoredial occurs when a document fails to be sent either because the destination number is engaged or
because of some error condition.
Redialling may occur in two ways:
•
Automatically by the fax machine
•
Manually by pressing REDIAL
Autoredial may occur in the following conditions:
•
Destination number originally dialled manually from the fax machine keypad, without previously pressing
HOOK.
•
Destination number originally dialled automatically (one touch or speed dial).
Autoredial will not occur in the following conditions:
•
Destination number originally dialled from the telephone.
•
Destination number originally dialled from the fax machine keypad after having pressed HOOK.
This heading describes how the fax machine automatically redials a number and how the user can make a
further attempt at connection by pressing REDIAL.
v
An attempt at transmission has failed following manual or automatic dialling (see conditions above). The
document is still in the ADF ready for transmission.
TRANSMISSION
to remove the document (REMOVE
81