Station Preset - Subaru Forester 2013 Owner's Manual

& Station preset
! How to preset stations
1. Select the preferred reception mode.
2. Select the preferred station.
3. Press and hold one of the preset
buttons (from to
frequency. If the button is pressed briefly,
the preceding selection will remain in the
memory.
NOTE
. Up to six stations for each reception
mode may be preset.
. If the connection between the radio
and battery is broken for any reason
such as vehicle maintenance or radio
removal, all stations stored in the
preset buttons are cleared. If this
occurs, it is necessary to reset the
preset buttons.
! Selecting preset stations
1. Select the preferred reception mode.
2. Press the preferred preset button
(from to ) briefly.
! Auto-store
"A.S" button
Using the Auto-store function, you can
) to store the automatically store 6 stations on the
current waveband by pressing and holding
the "A.S" button. Use Auto-store to quickly
find the strongest stations, for example
when traveling through different reception
areas.
NOTE
. When you use Auto-store, the new
stations replace any stations pre-
viously stored.
. Interrupting Auto-store: If you acci-
dentally press the Auto-store button,
you can cancel the Auto-store function
before the Auto-store function has
been completed as follows.
– switching to the other source
mode
– switching to the other band
– turning the "TUNE/TRACK" dial
– operating the "SEEK" button
Audio/FM/AM radio operation
! Displaying and selecting preset
stations
NOTE
For models with multi function display,
the list of the preset broadcasting
stations will be displayed when the
"LIST" button is briefly pressed during
AM/FM reception. For details, refer to
"Audio screen" F3-51.
"LIST" button
"TUNE" dial
– CONTINUED –
5-13