When Access Key Does Not Operate Properly; Replacing Battery Of Access Key; Technical Information For Europe Models; Remote Keyless Entry System - Subaru Forester 2013 Owner's Manual

Hide thumbs Also See for Forester 2013:
Table of Contents

Advertisement

2-16
Keys and doors/Remote keyless entry system
& When access key does not
operate properly
Refer to "Access key – if access key does
not operate properly" F9-16.
& Replacing battery of access
key
Refer to "Replacing battery of access key"
F11-54.
& Technical information for
Europe models
. This device complies with the essential
requirements of the Radio and Telecom-
munications Terminal Equipment Directive
1999/5/EC. A copy of the original Declara-
tion of Conformity and the CE marking are
found in chapter 13.
. Hereby, DENSO CORPORATION de-
clares that this 13CZY/14AER is in com-
pliance with the essential requirements
and other relevant provisions of Directive
1999/5/EC.

Remote keyless entry system

The remote transmitter can be used within
a distance of approximately 1.0 m (3.2 ft)
of the vehicle. It can be used to lock and
unlock all of the doors and the rear gate.
For models with power rear gate, it can be
used to open or close the rear gate.
The system's operable distance will be
shorter in areas near a facility or electronic
equipment emitting strong radio waves
such as a power plant, broadcast station,
TV tower, or remote controller of home
electronic appliances.
CAUTION
. When you carry the remote trans-
mitter on an airplane, do not
press the button of the remote
transmitter while in the airplane.
When any button of the remote
transmitter is pressed, radio
waves are sent and may affect
the operation of the airplane.
When you carry the remote trans-
mitter in a bag on an airplane,
take measures to prevent the
buttons of the remote transmitter
from being pressed.
. Do not expose the transmitter to
shocks.
. Do not take the transmitter apart.
. Do not get the transmitter wet. If it
gets wet, wipe it dry with a cloth
immediately.
NOTE
. Before leaving the vehicle, make
sure that the doors are locked.
. If any of the doors or the rear gate is
open, this function does not operate.
. For models with "keyless access
with push-button start system", when
the lock button on the access key is
pressed while the access key is placed
too close to the vehicle body, unlock-
ing by the keyless access functions
may not work. In such a case, the
functions will recover by unlocking
using the remote keyless entry system.
& Locking and unlocking doors
NOTE
The setting of the hazard warning
flasher operation can be changed by
your SUBARU dealer. We recommend
that you contact your SUBARU dealer
for details. Also, for models with multi
function display, the setting of the
hazard warning flasher operation can

Advertisement

Table of Contents
loading

Table of Contents