Sound Setting (If Equipped) - Subaru Forester 2013 Owner's Manual

3-88
Instruments and controls/Multi function display
! Deleting audio device
1. Select the "Delete Audio" menu.
2. Perform the procedure described in
"Deleting device" F5-31.
! Speed volume setting
1. Select the "Speed Volume" menu.
2. Operate the control dial to select the
preferred setting.
! Regional setting (Europe models)
The setting procedure is the same as
"Speed volume setting" F3-88, but select
the "Regional" item in step 1.
! Volume adjust setting (Europe
models)
The setting procedure is the same as
"Speed volume setting" F3-88, but select
the "Volume Adjust" item in step 1.
! Beep setting
The setting procedure is the same as
"Speed volume setting" F3-88, but select
the "Beep" item in step 1.
& Sound setting (if equipped)
Control dial
Press the control dial on the audio set to
display the sound setting screen. You can
set the following items by operating the
multi function display.
Item Range of levels
Bass
Middle
Treble
Fader
Balance
Virtual Bass*
Sound Restorer*
Vocal Image Control*
*: If equipped
To select the next item: Press the control
dial.
−8 to +8
−8 to +8
−8 to +8
R9 to F9
L9 to R9
Off to On
Off to On
L9 to R9