Station Preset - Subaru Outback 2006 Manual

NOTE
While you are holding down either side
of the TUNE/TRACK button, the tuning
frequency will not stop changing even
if the frequency of a receivable station
is reached.
!
Stereo indicator
The stereo indicator "ST" will come on
when an FM stereo broadcast is received.
!
Seek tuning (SEEK)
If you press the " " or " " side of the
SEEK/SCAN button briefly, the radio will
automatically search for a receivable
station and stop at the first one it finds.
This function may not be available, how-
ever, when radio signals are weak. In such
a situation, perform manual tuning to
select the desired station.
!
Scan tuning (SCAN)
S05AW0202
S05AW0203
If you press the " " or "
SEEK/SCAN button for 0.5 second or
longer, the radio will switch to scan mode.
In this mode, the radio scans through the
radio band until a station is found. The
radio will stop at the station for five
seconds while displaying the frequency,
after which scanning will continue until the
entire band has been scanned.
Press the " " or " " side of the button
again to cancel the scan mode and to stop
on any displayed frequency.
If you hold down the "
button, the radio will scan up the fre-
quency band (from low frequencies to high
frequencies). If you hold down the "
side of the button, the radio will scan down
the frequency band (from high frequencies
Black plate (205,1)
to low frequencies).
S05AW0204
Automatic tuning may not function prop-
erly if the station reception is weakened by
distance from the station or proximity to
tall buildings and hills.
& Station preset
!
How to preset stations
1. Press the "FM AM" button to select
FM1, FM2 or AM reception.
2. Press the "
button or tune the radio manually until the
desired station frequency is displayed.
" side of the
3. Press one of the preset buttons for
more than 1.5 seconds to store the
frequency. If the button is pressed for less
than 1.5 seconds, the preceding selection
will remain in memory.
NOTE
. If the connection between the radio
and battery is broken for any reason
such as vehicle maintenance or radio
removal, all stations stored in the
" side of the preset buttons are cleared. If this
occurs, it is necessary to reset the
preset buttons.
. If a cell phone is placed near the
"
radio, it may cause the radio to emit
noise when it receives calls. This noise
北米Model "A2440BE-A" EDITED: 2006/ 12/ 6
5-11
Audio
S05AW03
S05AW0301
" or " " side of the
– CONTINUED –
5