Subaru Forester 2013 Owner's Manual page 204

3-76
Instruments and controls/Multi function display
2. Operate the " " or "
select the "On/Off" item, and then pull the
" /SET" switch toward you.
3. The current setting will be displayed.
Pull the " /SET" switch toward you to
enter the selection mode.
" switch to 4. Select "On" or "Off" by operating the
" " or "
SET" switch toward you.
5. Select "Set" by operating the "
switch, and confirm the setting by pulling
the " /SET" switch toward you.
" switch, and then pull the " /
6. The system will notify you that the
setting is complete.
! Clear setting
1. Perform the preparation steps accord-
ing to "Preparation for maintenance set-
tings" F3-74.
"