Bluetooth Audio (If Equipped); Media Format; Setting Bluetooth ® Audio - Subaru Forester 2013 Owner's Manual

5-30
®
Audio/Bluetooth audio
®
Bluetooth audio (if
equipped)
NOTE
The Bluetooth word mark and logo are
registered trademarks of Bluetooth
SIG, Inc.
This function enables you to play back
audio sources recorded in Bluetooth
audio devices. You need to register the
®
Bluetooth audio device in the system
before using it.
NOTE
. The Bluetooth
®
audio function may
not operate properly under the follow-
ing conditions.
– The device is turned off.
– The battery of the device has run
down.
– The device is not connected to
the system.
– The device is behind the seat or
in the glove box.
– A metal material is covering or
touching the device.
. Depending on the type of device that
is used, operation and sound volume
may be different from normal use of
those devices.
. The sound quality may degrade due
to the influence of the device that is
connected to the system or the circum-
stances of the Bluetooth network.
. When another Bluetooth
simultaneously connected, noise may
be heard.
& Media format
®
Bluetooth audio devices cannot be
®
connected if they are not compatible with
the following Bluetooth
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
& Setting Bluetooth
NOTE
For models with multi function display,
Bluetooth
multi function display. For details, refer
to "Bluetooth
"MENU" button
1. Select the "BT-A SETUP" menu by
pressing the "MENU" button.
®
device is
"TUNE/TRACK" dial
2. Perform the following procedure by
operating the "TUNE/TRACK" dial while
"BT-A" is displayed.
®
profiles.
NOTE
You cannot set Bluetooth
driving.
®
audio
®
audio can be set via the
audio setting" F3-86.
®
®
audio while