Headlight Washer (If Equipped) - Subaru Forester 2013 Owner's Manual

Hide thumbs Also See for Forester 2013:
Table of Contents

Advertisement

3-104
Instruments and controls/Headlight washer
wiper is not in use, turn the knob switch
downward to the " " position. The washer
fluid sprays and the wiper operates until
you release the knob.
Headlight washer (if
equipped)
If you pull the wiper control lever toward
you and hold it for more than 1 second
with the ignition switch in the "ON"
position, the headlight washer operates
together with the windshield washer in the
following conditions.
. when the light switch is in the "
position (except Australia models)
. when the light switch is in the "
position (Australia models)
. when the light switch is in the "AUTO"
position and the headlights illuminate
automatically (models with auto on/off
headlights)
The windshield washer stops spraying
washer fluid as soon as you release the
wiper control lever. The headlight washer
sprays the washer fluid for approximately
1 second and then stops automatically.
CAUTION
Do not operate the washer if the
washer fluid tank is empty. This may
cause overheating of the washer
motor. Check washer fluid level
frequently, such as at fuel stops.
NOTE
When the area around the nozzle cover
of the headlight washer is frozen,
remove the ice before using.
"
"

Advertisement

Table of Contents
loading

Table of Contents