Power Door Locking Switch; Key Lock-In Prevention Function (Except Models With Double Locking System) - Subaru Forester 2013 Owner's Manual

Hide thumbs Also See for Forester 2013:
Table of Contents

Advertisement

2-6
Keys and doors/Power door locking switch
the lights, it is necessary that each door and the
rear gate are completely closed.
The operational/non-operational setting of
this function can be changed by a
SUBARU dealer. We recommend that
you contact your SUBARU dealer to
change the setting.
NOTE
. The factory setting (default setting)
for this function is set as "operational".
. When leaving the vehicle, please
make sure that all doors and the rear
gate are completely closed.
. For models with the push-button
ignition switch, the battery drainage
prevention function does not operate
while the ignition switch is in "ACC" or
"ON" position.
. For models without the push-button
ignition switch, the battery drainage
prevention function does not operate
while the key is in the ignition switch.

Power door locking switch

1)
Lock
2)
Unlock
All doors and the rear gate can be locked
and unlocked by the power door locking
switch located at the driver's side door.
To lock the doors including the rear gate,
push the front side of the switch.
To unlock the doors including the rear
gate, push the rear side of the switch.
NOTE
. With a vehicle that has a double
locking system, pushing the unlocking
position of the power door locking
switch has no effect when the double
locking system is activated.
. For Australia models, after locking
all doors and the rear gate using the
keyless access function or remote
keyless entry system, pushing the
unlock position of the power door
locking switch has no effect.
& Key lock-in prevention func-
tion (except models with
double locking system)
This function prevents the doors from
being locked under the following condi-
tions.
. The key is still in the ignition switch
(models without "keyless access with
push-button start system")
. The ignition switch is in the "ON"
position (models with "keyless access with
push-button start system")
This function's operational/non-opera-
tional setting can be changed by a
SUBARU dealer. We recommend that
you contact a SUBARU dealer for details.
NOTE
When leaving the vehicle, make sure
that you are holding the key before
locking the doors.

Advertisement

Table of Contents
loading

Table of Contents