Subaru 2007-2013MY Legacy/Outback Service Bulletin

ATTENTION:
IMPORTANT - All
GENERAL MANAGER q
Service Personnel
PARTS MANAGER
Should Read and
q
CLAIMS PERSONNEL q Initial in the boxes
provided, right.
SERVICE MANAGER
q
APPLICABILITY:
2007-2013MY Legacy/Outback
SUBJECT:
Service Manual Corrections
INTRODUCTION
The purpose of this bulletin is to provide a description of current changes to Service Manuals
available via the Subaru Technical Information System (STIS) web site. The tables contained within
this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to
always refer to the STIS web site when looking for the latest Service information. Printed pages will
not be made available to update printed Service Manuals.
Paper manuals may have different page numbering then what is reflected below, based on
multiple new and revised pages. Please refer to the information contained on the STIS web site
for all future, update service manual information.
YEAR MODEL SECTION
Engine 1
Engine 2
Transmission
Chassis
Legacy/
2013
Outback
Transmission
Legacy/
2012 Chassis
Outback
Bulletin Number: 18-167-12; Date: 03/08/13
SERVICE BULLETIN
PAGE(S)
FU(H4DO)-58,59
EN(H4DO)(diag)-43
EN(H4DO)(diag)-298
EN(H6DO)(diag)-364
CVT-232
CVT-266
WT-9,10
PB-17
PB(Diag)-23
Body AC-14,80,109
GW-40,42,47
GW-21,39
PSM(Diag)-1-20
CC-4
LAN(diag)-12,14
BC(diag)-8
BC(diag)-35
CVT-110
PB(Diag)-24
Body GW-21,39
NUMBER:
DESCRIPTION OF CHANGE
Camshaft Position Sensor testing with
Oscilloscope steps changed.
Freeze Frame data display information added.
Diagnostic steps for DTC P2101 changed.
Diagnostic steps for DTC P2101 changed.
Cautions/note added for Reverse Brake Servicing.
Cautions/note added for Drive Pinion Servicing.
TPMS location description updated.
Parking Brake Shoe clearance steps changed.
Inspection Mode Procedure changed.
New instructions and images.
Instructions added for Windshield replacement
on EyeSight Vehicles.
Power Window Motor Inspection steps changed.
New section introduced at this update.
Please review on STIS.
New Image.
Wiring diagrams changed.
I/O chart updated.
Diagnostic chart for DTC B1500 has changed.
Changes made to Secondary Pressure Sensor inspections.
Inspection Mode Procedure changed.
Power Window Motor Inspection steps changed.
18-167-13
DATE:
03/08/13
Continued...
Page 1