Subaru Forester 2013 Owner's Manual page 203

switch toward you.
4. Select a number by operating the "
or " " switch, and then pull the " /SET"
switch toward you.
If you also want to change the setting for
another location, repeat steps 3 and 4.
5. Select "Set" by operating the "
" " switch and confirm the setting by
pulling the " /SET" switch toward you.
"
6. The system will notify you that the
setting is complete.
NOTE
. The notification will be displayed
with information of both date and
distance or either date or distance in
accordance with the setting.
. When "_ _" is selected for either the
"Month", "Day", "Year" or "Distance"
item instead of numbers, the set noti-
fication will be deactivated.
. If the notification continues for 15
days or more, the system will display
"_ _" on the screen.
. When the distance announcement
Instruments and controls/Multi function display
" or
reaches 0 km, the display will show
"0000" for the next 500 km (311 miles).
After exceeding 500 km (311 miles), "_
_ _ _" will be displayed.
! Oil filter setting
The setting procedure is the same as
"Engine oil setting" F3-74, but select the
"Oil Filter" item in step 2.
! Tires setting
The setting procedure is the same as
"Engine oil setting" F3-74, but select the
"Tires" item in step 2.
! Maintenance schedule setting
The setting procedure is the same as
"Engine oil setting" F3-74, but select the
"Maintenance Schedule" item in step 2.
! On/Off setting
1. Perform the preparation steps accord-
ing to "Preparation for maintenance set-
tings" F3-74.
3-75
– CONTINUED –