Subaru Forester 2013 Owner's Manual page 62

Hide thumbs Also See for Forester 2013:
Table of Contents

Advertisement

1-34
Seat, seatbelt and SRS airbags/Child restraint systems
! Models with ALR
1)
Lock-off lever
1)
Locking clip
NOTE
If using ALR mode is not recom-
mended by the manufacturer's instruc-
tions supplied with the child restraint
system, use the lock-off lever or the
locking clip instead of using ALR
mode.
1. Remove the head restraint of the rear
seating position where the child restraint
system is to be installed.
2. For models with rear seat reclining
mechanism, adjust the seatback to the
upright position.
3. Place the child restraint system on the
seat.
4. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by its
manufacturer.
5. Insert the tongue plate into the buckle
until you hear a click.

Advertisement

Table of Contents
loading

Table of Contents