To Temporarily Cancel The Cruise Control - Subaru Forester 2013 Owner's Manual

2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
3. Press the "RES/SET" switch to the
"SET" side and release it. Then release
the accelerator pedal.
At this time, the cruise control set indicator
light is illuminated in the combination
meter.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
The cruise control can be temporarily
canceled in the following ways.
. Press the "CANCEL" button.
. Press the X mode switch to activate the
Starting and operating/Cruise control
X mode (models with X mode)
. Depress the brake pedal.
. Depress the clutch pedal (MT models
only).
WARNING
For CVT models, you can cancel the
cruise control by shifting the select
lever into the "N" position. However,
do not shift the lever into the "N"
position while driving except in case
of emergency. If the select lever is
shifted into the "N" position, the
engine brake will no longer work.
This could result in an accident.
The cruise control set indicator light in the
combination meter turns off when the
cruise control is canceled.
– CONTINUED –
7-41