Subaru Forester 2013 Owner's Manual page 108

2-14
Keys and doors/Keyless access with push–button start system
first. You can then touch the door lock
sensor to lock the doors.
! Locking with the rear lock button
1) Rear lock button
Carry the access key, close all doors
including the rear gate and press the rear
lock button. The rear gate and all doors
will be locked. Also, the hazard warning
flashers will flash once.
! Door unlock selection function
The door unlock selection function makes
it possible to unlock the driver's door or
the rear gate without unlocking any other
doors. You can change the setting for the
driver's door and for the rear gate inde-
pendently.
The operational/non-operational setting
for this function can be changed by a
SUBARU dealer.
Operational: Only the driver's door or the
rear gate will be unlocked.
Non-operational: All doors and the rear
gate will be unlocked.
For the factory setting (default setting),
refer to "Function settings" F25.
For further details, we recommend that
you consult a SUBARU dealer.
! Power saving function
To protect the access key battery and the
vehicle battery, the keyless access func-
tion will be disabled as follows.
. When the keyless access function and
the remote keyless entry system have not
been used:
(1) 5 days after the push-button igni-
tion switch has been turned off, com-
munication between the antennas and
the access key will be stopped.
(2) 9 days after step 1, the sensors
(both lock sensor and unlock sensor)
on the front passenger's door will be
disabled.
. When the access key has been left in
the operating range for 10 minutes or
longer while all doors are locked, the
keyless access function will be disabled.
! Recovery from power saving
mode
When one of the following is operated, the
keyless access function will be recovered.
. Unlock by gripping the door handle
(only when the sensors on the front
passenger's door are not disabled) or
pressing the rear gate opener button on
the rear gate
. Lock or unlock by the remote keyless
entry system
. Lock or unlock by the mechanical key
! Automatic locking (except models
with double locking system)
If any of the doors or the rear gate was not
opened within 30 seconds after unlocking,
they will be automatically locked again.
The function's operational/non-operational
setting and the time until automatic locking
takes place can be changed by a
SUBARU dealer. For more details, we
recommend that you contact a SUBARU
dealer.
For models with multi function display, the
setting and the time can be changed by
operating the multi function display. For
details, refer to "Security Relocking" F3-
80.