Subaru Forester 2013 Owner's Manual page 292

Hide thumbs Also See for Forester 2013:
Table of Contents

Advertisement

5-40
Audio/Hands–free system
! Volume control
1)
Volume control switch
2)
Speech volume control switch
3)
Talk switch
Press the volume control switch to the "+"
side to increase the phone call volume,
voice volume and voice guidance volume.
Press the switch to the "−" side to
decrease the volume.
Press the speech volume control switch to
the "
" side to increase the speech
volume. Press the switch to the "
to decrease the volume.
During a call, press the talk switch
turn the microphone off. Press the talk
switch
once again to turn the micro-
phone on.
! Adjustable level of each volume
Volume
Phone call
Voice
Voice guidance
! Registering phonebook data
! Registering by phone
1. Select the "PHONE BOOK" menu.
2. Select the "ADD ENTRY" menu.
3. Select the "BY PHONE" menu.
4. Select the "CONFIRM" menu.
– Then "TRANSFER" will be dis-
played.
5. Transfer the data from the cell phone.
For details about transferring the data,
refer to the instruction manual of the cell
phone.
6. Select the "CONFIRM" menu.
7. Perform either of the following proce-
dures.
" side
– Select the "RECORD NAME"
menu.
– Press the talk switch
to
8. Say the name (voice tag) to be
registered.
9. Select the "CONFIRM" menu.
Range
Initial setting
0 to 14
7
0 to 14
7
3
0 to 6
.
– Then "STORED" will be displayed
and the mode will change to the
registering speed dial mode. Refer to
"Registering speed dial" F5-41.
! Registering by inputting manu-
ally
1. Select the "PHONE BOOK" menu.
2. Select the "ADD ENTRY" menu.
3. Select the "MANUAL INPUT" menu.
4. Input the phone number to be regis-
tered.
5. Perform either of the following proce-
dures.
– Select the "RECORD NAME"
menu.
– Press the talk switch
6. Say the name (voice tag) to be
registered.
7. Select the "CONFIRM" menu.
– Then "STORED" will be displayed
and the mode will change to the
registering speed dial mode. Refer to
"Registering speed dial" F5-41.
NOTE
While inputting the phone numbers, if
"GO BACK" is chosen using the
"TUNE/TRACK" dial, the character that
was input last is deleted.
.

Advertisement

Table of Contents
loading

Table of Contents