How To Turn The Power On/Off; Turn On/Off The Power; Lock The Operation; How To Adjust The Display Brilliance - Furuno MU-192HD Operator's Manual

3. OPERATION
3.2

How to Turn the Power On/Off

This section shows how to turn on/off the display unit and the key lock function.
3.2.1

Turn on/off the power

How to turn on/off the power depends on the setting of the slide switch. The slide switch is set
when the display unit is installed. See section 1.7.
Note 1: When you restart the display unit, wait at least three seconds before powering the unit.
Note 2: The screen refreshes slower in low ambient temperature.
Slide switch "ON"
The external equipment connected to the DVI/HDMI port can power on/off the display unit.
Note 1: You can not turn on the power with the
Note 2: If equipment is connected to both DVI and HDMI ports, turn off the power of the connected
equipments to turn off the display unit.
Slide switch "OFF"
1. Press the /BRILL key to turn on the display unit.
2. Press and hold the
turn off the display unit. While you hold the key, the dis-
play shown right appears.
3.2.2

Lock the operation

You can lock the display unit to prevent operation. Any key (except the
operative.
1. While pressing and holding down the PIP key, turn on the display unit. Press and hold the PIP
key for more than five seconds.
Note: When the slide switch is "ON", turn on the connected external equipment while pressing
the PIP key to turn on the display unit.
2. To cancel the lock, turn off the display unit and then turn it on while pressing and holding down
the PIP key. Press and hold the PIP key more than five seconds.
3.3

How to Adjust the Display Brilliance

You can adjust the display brilliance as follows:
1. Press the /BRILL key momentarily to show the BRILL adjustment window.
The window shown right disappears if there is no opera-
tion for five seconds.
/BRILL key for three seconds to
25
/BRILL key on MU-192HD.
This monitor will shut down in three seconds.
BRILL
SHUT DOWN
/BRILL key) will be in-
50