Pbx Settings; How To Set The Automatic Timeout Function; How To Set Internal Call Routing - Furuno FELCOM251 Operator's Manual

6. SETTINGS ON WEB INTERFACE
6.5

PBX Settings

6.5.1

How to set the automatic timeout function

The automatic timeout function automatically disconnects a voice call (with the excep-
tion of emergency call type 505, urgency call 32/38/39, Inmarsat special numbers, ex-
tension numbers and Distress calls) when the receiver is left off the hook for the
specified number of period of time. This feature is useful for preventing unwanted
charges because the phone is left off the hook.
1. Referring to section 6.1, login as an Administrator.
2. Click [Admin] in the menu bar.
3. Click [Telephony Settings].
4. Click [PBX Settings] to show the [PBX Settings] menu.
5. To enable the timeout function, put a [ ] in the box on the left side of [Enabled]
(click the box to add [ ]).
To disable the function, uncheck the [ ] in the box (click the box to delete [ ]).
6. Input the timeout (1 to 99 minutes) in the [Timeout] field.
Communications which exceed this time are automatically disconnected.
7. Click the [Apply] button.
The message "Applied." appears.
8. Click the [Close] button to close the message.
6.5.2

How to set internal call routing

When a voice call is received for an internal extension number, the call can be trans-
ferred to the internal phone automatically. Follow the procedures to set up the internal
call routing.
1. Referring to section 6.1, login as an Administrator.
2. Click [Admin] in the menu bar.
3. Click [Telephony Settings].
4. Click [PBX Settings] to show the [PBX Settings] menu.
5. To enable the internal call routing function, put a [ ] in the box on the left side of
[Enabled] (click the box to add [ ]).
To disable the feature, uncheck the [ ] in the box (click the box to delete [ ]). A
call is routed according to the setting in section 6.2.
6-10