Changing The Status Display Screen - Mitsubishi Electric EZMOTION MR-E Super MR-E-10A-QW003 Instruction Manual

General-purpose ac servo
Table of Contents

Advertisement

6. DISPLAY AND OPERATION
Name
Within one-revolution
position high
Load inertia moment
ratio
Bus voltage
www.DataSheet4U.com

6.2.3 Changing the status display screen

The status display item of the servo amplifier display shown at power-on can be changed by changing the
parameter No.18 settings.
The item displayed in the initial status changes with the control mode as follows.
Symbol
Unit
Cy2
100
The within one-revolution position is displayed in 100 pulse increments of
pulse
the encoder.
The value returns to 0 when it exceeds the maximum number of pulses.
The value is incremented in the CCW direction of rotation.
dC
Multiplier
The estimated ratio of the load inertia moment to the servo motor shaft
( 1)
inertia moment is displayed.
Pn
V
The voltage (across P-N) of the main circuit converter is displayed.
Control mode
Position
Position/
Cumulative feedback pulses/servo motor speed
internal speed
Internal speed
Description
Status display at power-on
Cumulative feedback pulses
Servo motor speed
6 - 4
Display
range
0
to
1310
0.0
to
300.0
0
to
450

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents