Display sequence
When an alarm occurs,
its alarm code appears.
Status display list
The following table shows the status of the converter unit.
Display
*1
*1 "*" represents the alarm numbers and warning numbers.
4 STRUCTURE (PARTS IDENTIFICATION)
30
4.3 Converter unit switch settings and operation panel
Initializing
Initialization completed
Ready-off (charging)
Ready-on
(charging completed)
Forced stop
Status
Initializing
Initialization complete
Ready-off (charging)
Ready-on (charging complete)
Alarms and warnings
When an alarm No. or warning No. is displayed
Example:
When [61] has occurred
Blinking
1.5 s
Blinking
1 s
1.5 s
Displays blank
Alarm reset or warning cleared
Description
Displayed during initialization.
Displayed when the status is initialization complete, ready-off, and servo-off.
Displayed in the servo-off status.
Displayed in the servo-on status.
The alarm number or warning number that occurred is displayed.
Example:
When [6E.1] has occurred
Blinking
1 s
Blinking
1 s
1 s
Blinking
1 s
Displays blank