Introduction; Features Of Servo Motor; Rating Plate - Mitsubishi Electric EZMOTION MR-E Super MR-E-10A-QW003 Instruction Manual

14. SERVO MOTOR

14.2 Introduction

14.2.1 Features of servo motor

The following table indicates the main features of the servo motor. The items marked
standard. For detailed specifications, refer to the chapter of the servo motor series.
Feature
Rated speed
www.DataSheet4U.com Encoder resolution [pulse/rev]
Rated output [kW]
Power supply voltage of
compatible servo amplifier
(Note 1)
Electromagnetic brake
Special shaft
Compliance with overseas
standards
Protection type
Note 1. Some power supply voltages may not be usable depending on the servo amplifier capacity.
For the power supply voltage range, refer to section 1.3.
2. Compatible products are available. For details, refer to section 14.6.3 and 14.7.3.
3. Compatible products are available. For details, refer to section 14.6.4 and 14.7.4.
4. Except for the shaft-through portion.
5. Only HF-SE52JW1-S100 corresponds.

14.2.2 Rating plate

Item
2000r/min
3000r/min
One-phase 230VAC
Three-phase 200VAC
to 230VAC
EN Standard
UL/C-UL Standard
AC SERVO MOTOR
HF-KE13W1-S100
INPUT 3AC 96V 0.8A
OUTPUT 100W IEC60034-1 '03
3000r/min IP55CI.B 0.5kg
SER.No. H14425001 034
Servo motor series
HF-KE W1-S100
Low inertia Small capacity
131072
0.1 to 0.75
(Note 2)
(Note 3)
IP55 (Note 4, 5)
Model
Input power
Rated output
Rated speed, Protection structure,
Insulation class, Mass
Serial number
14 - 2
are supported as
HF-SE JW1-S100
Medium inertia/medium capacity
131072
0.5 to 2.0
(Note 4)
(Note 2)
(Note 3)
IP65