Display Screen - Mitsubishi Electric G-50A Instruction Book

3 - 2 Display Screen

Operation setting function
PROHI
BITED
Each operation and monitor of unit is
performed in collective or group unit.
Refer to section "4. User operation
(page 10)" for the detail of operation
methods.
NOTE: The temperature setting
includes a function to switch the
display between Celsius (˚C) or
Fahrenheit (˚F) (page 34).
2
User operation menu
1 OPERATION MONITOR
2 OPERATION SETTING
3 SCHEDULE SETTING
4 MALFUNCTION
MONITOR
5 CURRENT TIME
SETTING
3
Timer setting function
P 4
The weekly schedule setting is
performed in group units.
Refer to section "4-3 Timer
operation (page 19)" for the
detail of operation methods.
Function when the timer operates
Operation monitor function
02
01
ON/OFF operation and monitor of unit
are performed. Refer to section "4.
User operation (page 10)" for the
detail of operation methods.
1
Continuously press
(2 seconds or longer)
4
Malfunction monitor function
The unit address, error code
and the unit address which
detected the malfunction are
displayed when a malfunction
occurs.
Refer to section "4-4 Malfunc-
tion (page 23)"
Function when the unit malfunction
Display
Initial setting menu (Installation/Maintenance)
and
1 GROUP SETTING
2 INTERLOCKED
3 REFRIGERANT
4 MALFUNCTION
5 USER SETTING
NEXT NEXT
5
Current time setting
( D A Y - M O N T H - Y E A R )
The current time setting can be
performed.
Refer to section "4-5 Current
time setting (page 24)" for the
detail of operation methods.
Function when the current time
– 8 –
Overall status lamp
The lamp indicates the unit opera-
tion condition.
ON......During operation
OFF......All group are stopping
BLINKING......Malfunction
SETTING
MONITOR
MONITOR
1
Group setting function
001
This performs the same group
setting of the indoor unit, local
remote controller and sub
system controller, etc.
Refer to section "5. Initial
setting (page 25)" for detail of
operations.
G-50A
ENTER