Agilent Technologies InfinityLab LC Series User Manual page 76

3 Using the Module
Installing and Using Column ID Tags
10 Click the >> button at the top right of the Column Tag Information table to
11 If all the information for the column is correct, click the Ok/Write Tag button to
12 You can edit the information on the column ID tag using the ChemStation Edit
13 When you are sure that you will not make any more changes to the
Figure 15
Once a column ID tag has been sealed, the static fields cannot be edited.
NOT E
Until the column ID tag has been sealed, you can delete all information in static
fields on the tag using the Clear Column Tag Information command from the
context menu.
Agilent InfinityLab LC Series Multicolumn Thermostats User Manual
show the hidden table columns. Use the horizontal scroll bar to access the
columns at the right of the table.
write the information to the column ID tag.
The information in the ChemStation's Edit Columns table is also updated.
Columns table. When you have finished editing the information, repeat steps 7
to 9 to update the information in the tag.
information in the tag, you can irrevocably seal the tag to set all static fields to
read-only. Right-click in the appropriate line in the Column Tag Information
table and select Seal Column Tag from the context menu.
The Column Tag Information table context menu
The sealed column is shown in the Column Tag Information table with the
icon at the beginning of the row. In the Edit Columns table of the ChemStation,
it is shown with Sealed in the Tag column.
The Plumbing button of the ChemStation Edit Columns table displays the
Column Assignment dialog box. It can also be displayed by selecting Column
Assignment from the context menu of the column compartment Dashboard
panel in the ChemStation's Method and Control view.
76