Agilent Technologies InfinityLab LC Series User Manual page 73

3 Using the Module
Installing and Using Column ID Tags
Using Column ID Tags with ChemStation
1 In the Method and Run Control view of the Agilent OpenLAB CDS ChemStation
2 Select a line in the table that contains column information as close as
Column catalogs are available only in OpenLab CDS ChemStation Edition C.01.07
NOT E
SR2 and above with drivers A.02.14 and above. Click the Catalog button to
display a dialog box that allows you to choose how to load the catalog into the
table.
3 Click the Insert button to insert a line above the currently selected line, or the
4 Click the Edit button to display a dialog box that allows you to edit the
5 Add or edit the other column-specific information (for example, maximum
6 If the column is installed and will be used in the Multicolumn Thermostat,
Agilent InfinityLab LC Series Multicolumn Thermostats User Manual
Edition, select Columns from the Instrument menu.
The Edit Columns dialog box is displayed.
If the Edit Columns table is empty, go straight to Step 3.
Figure 12 The ChemStation Edit Columns table
possible to the column you are adding. The selected line acts as a template
for the new column.
Append button to add a line to the end of the table.
The new line contains a copy of the information in the template line.
column-specific information such as Serial Number, Batch Number and
Description.
pressure, maximum temperature, length, diameter, particle size) in the Edit
Columns table.
select YES in the Installed column.
73