In This Book
This manual covers the following modules:
•
•
1
Introduction to the Multicolumn Thermostat
This chapter gives an introduction to the MCT and an instrument overview.
2
Site Requirements and Specifications
This chapter provides information on environmental requirements, physical and
performance specifications.
3
Using the Module
This chapter gives instructions on how to use the module.
4
Preparing the Module
This chapter provides information on how to set up the module for an analysis and
explains the basic settings.
5
Optimization
This chapter provides information on how to optimize the Multicolumn
Thermostat.
6
Troubleshooting and Diagnostics
Overview about the troubleshooting and diagnostic features.
7
Error Information
This chapter describes the meaning of error messages, and provides information
on probable causes and suggested actions how to recover from error conditions.
Agilent InfinityLab LC Series Multicolumn Thermostats User Manual
Agilent 1290 Infinity II Multicolumn Thermostat (G7116B)
Agilent 1260 Infinity II Multicolumn Thermostat (G7116A)
3