Agilent Technologies InfinityLab LC Series User Manual page 62

3 Using the Module
Installing the capillaries
7 Fasten all fittings on attached modules (autosampler, detector, additional
8 Push the valve into the rear position.
9 Place the capillaries that go to another module or waste into the capillary
10 Stow any excess lengths of the capillaries.
11 Perform a final leak check.
Agilent InfinityLab LC Series Multicolumn Thermostats User Manual
pumps). Fit all unused valve ports with blank nuts.
guides to prevent squeezing them when closing the front cover.
62