Agilent Technologies InfinityLab LC Series User Manual page 75

3 Using the Module
Installing and Using Column ID Tags
8 Click
9 Select the column information to import from the list of columns and click OK.
It may take several seconds before the information appears in the Column Tag
NOT E
Information table.
The characters semicolon (;), single quote (') and double quote (") are invalid for
NOT E
the Column Tag Information table. If these characters are used in any field of the
table, an error is displayed, and OK/Write Tag button is disabled. You must delete
all invalid characters before you can write the data to the tag.
The Description and Comment fields are limited to 32 characters in the Column
Tag Information table.
At this stage, you can assign a color to the column using the drop-down list in the
NOT E
Color Code column; this information is displayed in the Visualization panel, but is
not written to the tag.
Agilent InfinityLab LC Series Multicolumn Thermostats User Manual
in the Import column of an empty line in the Column Tag Information
table.
The list of columns from the ChemStation's Edit Columns table is displayed.
Figure 14 The list of columns from the ChemStation's Edit Columns table
To reduce the list to only those columns that are marked as Installed, mark the
Only show installed Columns check box.
The column information is imported into the Column Tag Information table.
75