Agilent Technologies InfinityLab LC Series User Manual page 50

3 Using the Module
Install Heat Exchanger
Parts required p/n
G7116-60041
5067-4780
0100-1516
5067-4741
5067-5403
G7116-68003
G7116-60071
G7116-60081
G7116-68003
5500-1596
5067-5966
5500-1578
5067-5965
1 Possible positions for heat exchangers. If only one col-
umn is used, the preferred positions are 2, 3, 6, or 7.
1
2
3
4
Agilent InfinityLab LC Series Multicolumn Thermostats User Manual
Description
Quick Connect Heat Exchanger Bio-inert
Bio Capillary 0.17 mm x 300 mm, 1.6 mm OD socket
(from column to detector)
Finger-tight fitting PEEK, 2/pk
ZDV union (Bio-inert)
UHP fitting
Column Holder Lamella, 2/pk
Bio-compatible option:
Quick Connect Bio Heat Exchanger Standard Flow
Quick Connect Bio Heat Exchanger High Flow
Column Holder Lamella, 2/pk
Quick Turn Capillary MP35N 0.12 mm x 280 mm
InfinityLab Quick Turn Fitting
Quick Connect Capillary MP35N 0.12 mm x 105 mm
InfinityLab Quick Connect LC fitting
2 Connect the sampler outlet capillary (or the capillary
from the column selection valve) to the inlet port of the
heat exchanger.
5
6
7
8
Max. 2.5 Nm
50