Controller Enclosure; Front; Figure 17 Front View Of A 2.5" Type Controller Enclosure (Eternus Dx60 S5/Dx100 S5/Dx200 S5); Figure 18 Front View Of A 3.5" Type Controller Enclosure (Eternus Dx60 S5/Dx100 S5/Dx200 S5) - Fujitsu ETERNUS DX S5 Series Operation Manual (Basic

A. Component Names

Controller Enclosure

Controller Enclosure
An operation panel and drives are installed in the front of the ETERNUS DX controller enclosure. Controllers and
power supply units are installed in the rear.

Front

This section provides the names of the components in the front of a controller enclosure.
■
ETERNUS DX60 S5/DX100 S5/DX200 S5
Figure 17 Front View of a 2.5" Type Controller Enclosure (ETERNUS DX60 S5/DX100 S5/DX200 S5)
1 2
3
1
Operation panel (refer to
2
2.5" drive (refer to
3
Flange cover
Figure 18 Front View of a 3.5" Type Controller Enclosure (ETERNUS DX60 S5/DX100 S5/DX200 S5)
1 2
Slot#8
Slot#4
Slot#0
3
1
Operation panel (refer to
2
3.5" drive (refer to
3
Flange cover
"■ Operation Panel" (page
"■ Drives" (page 108))
Slot#9 Slot#10
Slot#5 Slot#6
Slot#1 Slot#2
"■ Operation Panel" (page
"■ Drives" (page 108))
95
3
105))
Slot#11
Slot#7
Slot#3
3
105))
Operation Guide (Basic)