Fujitsu ETERNUS DX S5 Series Operation Manual (Basic page 52

4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
(3)
Install the stopper bracket.
Attach the stopper bracket to the front rack pillar.
Stopper bracket
The M5 screw positions for the stopper brackets are determined by the high-density drive
enclosure base line.
Insert the M5 screws in the seventh holes above the base line to fasten the stopper brackets.
7th hole
(M5 screw)
(4)
Install the flap brackets.
Attach flap bracket A and B on the right side of the rear rack pillar with the M4 screws.
High-density drive enclosure
Front/Rear
[Left]
4U
2nd hole
(M4 screw)
High-density drive
enclosure base line
Rack rail
(left)
(left)
M5 screw
M5 screw
(Rack pillar: front)
High-density drive enclosure
Front
[Left]
4U
High-density drive
enclosure base line
Rack rail
[Right]
2nd hole
(M4 screw)
Rack rail
(Rack pillar: rear)
Stopper bracket
(right)
[Right]
7th hole
(M5 screw)
52
Rack rail
(right)
Operation Guide (Basic)