Fujitsu ETERNUS DX S5 Series Operation Manual (Basic page 35

4. Component Expansion/Function Enhancement
Installing Additional Drives
4
Install the new drive.
(1)
Press the catch on the drive lock lever to unlock it.
Catch
(2)
Insert the drive all the way into the slot, making sure that it is firmly seated and that the lock lever
is still left open.
(3)
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
(4)
Check that the newly installed drive's DRIVE READY LED lights up green.
Lock lever
• Hold the drive with both hands to protect against jarring.
Lock lever
35 Operation Guide (Basic)