4. Component Expansion/Function Enhancement
Installing Long Wave SFP+ Modules (16Gbit/s)
11
Turn on the ETERNUS DX.
Refer to
"Powering On" (page 18)
12
Check that the PORT LINK/FAULT LED for the FC port on the replaced Long wave SFP+ module (16Gbit/s)
turns off or lights up green.
13
Start ETERNUS Web GUI to check the status of the newly added Long wave SFP+ module (16Gbit/s).
On the Internal Parts information in the [Channel Adapter Details] screen of ETERNUS Web GUI, check
that the FC port status is Normal and the SFP type is changed to "16G SFP+(SMF)". In addition, confirm
that all of the other components are in normal status.
for details on how to turn on the ETERNUS DX.
66
Operation Guide (Basic)